MSDS for TITANIUM™ PSU-30

[ PDF VERSION ]

I. Product Identification and Use:
Product Identification:            TITANIUM™ PSU
Product Use/Description:        Coated woven polyolefin self adhesive membrane for use as a roofing underlayment
Product Composition:               <25% Polyolefin Plastic
                                             <75% Rubberized Asphalt

II. Hazardous Ingredients:
Hazardous Component                 ACGIH TLV      LD50        %Wt

Petroleum Asphalt                         5.0mg/m        5-15g/kg > 50%
CAS # 8052-42-4

Petroleum Oil                                0.2000 TWA >15%
CAS # 64741-88-4

III. Physical Data:
a.  Physical State:                        Solid.                            
b.  Odor and Appearance:          Pigmented Woven fabric
                                                        Slight Petroleum Odor
c.  Odor threshold (ppm):         N.Ap.
d.  Vapor Pressure (mmHg):   N.Ap.
e.  Vapor Density (Air = 1):        N.Ap.                             
f.   Evaporation rate:                  N.Ap.
g.  Boiling Point (oC):                N.Ap.
h.  Freezing Point (oC):             N.Ap.
i.   pH:                                           N.Ap.
j.   Specific Gravity:                     1.2
k. Coef. Water/oil Dist.             N.Ap.

IV. Fire and Explosion Data:
a. Flammability:                           Will Support Combustion under direct flame
b. Fire Fighting Procedure:    The use of self-contained breathing apparatus is recommended for firefighters.
c. Means of extinction:             Water spray and dry chemicals.
d. Flash point (oC) and Method:                  >410°F (T.O.C.).
e. Upper flammable limit (% by volume):  N.Ap.
f. Lower flammable limit (% by volume): N.Ap.
g. Hazardous combustion products: Carbon Monoxide, Carbon Dioxide, Nitrogen Oxides and Sulfur
h. Explosion Data:                       Not sensitive to impact nor to static discharge.
V. Reactivity Data:
a. Chemical stability:                Yes.
b. Incompatibility with other  substances: None
c. Reactivity:                                 Non-reactive
d. Hazardous decomposition products:      No data.

VI. Toxicological properties:
a. Route of entry:                        Skin , Ingestion
b. Skin:  Avoid contact with skin. Excessive exposure may cause irritation to eyes, nose, throat and skin. Prolonged and repeated skin contact may cause skin irritation.
c. Ingestion:  Slightly toxic
Emergency and First Aid Procedures
Inhalation: Not Applicable.
Skin: Wash thoroughly with soap and water. If redness or irritation develops, obtain medical assistance.
Eyes: Flush with water at least 15 minutes. Obtain medical assistance.
Ingestion: Drink liquids. Obtain medical assistance.
Medical Conditions Aggravated by Exposure: Disorders or Diseases of the Skin, Eyes, Respiratory Track or Allergies
Carcinogenicity: No    NTP: No                        IARC Monographs
OSHA Regulated          Irritant: Yes                   Sensitizer: Yes
Mutagenic: No             Teratogenic: No          

VII. Preventive Measures:
a. Gloves:                                       Recomended
b. No respirator required under normal use.
c. Leak and spill procedure: N.Ap.
d. Waste disposal:                       See your local authorities for disposal instructions.
e. Handling and Storage:         Rolls should be adequately restrained to prevent shifting during handling and storage.
f. Storage Requirements:         N.Ap.
g. Special shipping information: None.
IX. Other Information:
a. Shipping Name:                        Asphaltic Roofing Material
b. DOT Hazard Class: Not Required

Prepared by: IW R&D group. (604) 820-5400
Revision Date: April 3, 2007

Disclaimer:
This information is furnished without warranty expressed or implied, except that it is accurate to the best knowledge of  InterWrap Industries Inc. The data on this sheet relates only to the specific material designated herein. InterWrap Industries Inc. assumes no legal responsibility for use or reliance upon this data.

For more information

Contact InterWrap Toll Free: on 1-888-713-7663 or email: info@interwrap.com