| TEST & STANDARD |
TITANIUM UDL-50 TYPICAL VALUE |
#30 FELT TYPICAL VALUE |
| Class A Fire ASTM E108 |
Pass |
N/A |
| Nail Sealability Modified ASTM D1970 |
Pass |
N/A |
| Permeability ASTM E96 |
0.05 perms |
.05 perms |
| Water Transmission ASTM D4869 |
Pass |
Pass |
| Tear Strength ASTM D4533 |
MD 55 lbs (25 kg) CD 55 lbs (25 kg) |
MD 4 lbs (1.8 kg) | CD 2 lbs (0.9 kg) |
| Tensile Strength ASTM D751 |
MD 178 lbs (81 kg) CD 176 lbs (80 kg) |
MD 70 lbs (32 kg) | CD 38 lbs (17 kg) |
| Burst Strength ASTM D751 |
300 psi (2065 kPa) |
62 psi (430 kPa) |
| Elongation ASTM D751 |
MD 20 % CD 20 % |
MD 2% CD 2% |
| Weight per Square ASTM D5261 |
4.7 lbs (2.13 kg) |
27.5 lbs ( 12.5 kgs) |
| Minimum Thickness ASTM D1777 |
30 mils (0.75 mm) |
60 mils (1.5 mm) |
Test data is based on an average taken over several production runs and should not be considered or interpreted as minimum or maximum values. Values are typical data and not limiting specifications. All values ± 10%. Dry tested conditions: in water, #30 felt will absorb +30% water and lose +50% strength when wet.
|
LENGTH PER ROLL: |
250’ / 76.2 m |
|
WIDTH PER ROLL: |
48” / 122 cm |
|
WEIGHT PER ROLL: |
48 lbs / 21.8 kg |
|
ROLL SIZE: |
10 sq / 93 m² |
|
ROLLS PER PALLET: |
25 |
|
PALLET WEIGHT: |
1250 lbs / 567 kg |
This product is manufactured in accordance with national standards which allow for non-critical variances in weights and measures. Values are typical data and not limiting specifications. All values ± 10%
|
